meekscutoff.com
Archive

March 2020

Browsing
In Health

Are You Pregnant and Concerned About Coronavirus?

No Comments

Towards the end of June, this year, over a million women in the US will give birth to nearly a million babies. And, naturally, with the current Coronavirus crisis, there is an unprecedented strain among the pregnant ladies. Especially among those in their third trimester, having to deliver in the times of a pandemic. Hence, in such circumstances, when it is hard to find reliable information, reproductive fertility treatment centers across the nation are stepping up.

All of these centers are preparing to fight the virus spread while also responding to the most basic queries. Fertility clinic Arizona are closely monitoring all developments and adhering to recommendations from the World Health Organisation (WHO), Centre of Disease Control (CDC) and the American Society of Reproductive Medicine (ASRM).

We understand that moms-to-be may be in a state of confusion about what to do and what to avoid. Hence, the established information discussed ahead will help you continue your fertility journey successfully. 

What Are the Risks Involved? 

Be it the COVID-19 or other viruses that cause respiratory infections such as influenza; women have had a higher risk of developing the illness. So, logically, it is important that pregnant women protect themselves. 

As per the Centers for Disease Control and Prevention, contracting coronavirus while pregnant could make you more vulnerable to respiratory problems like pneumonia. The reason is that in pregnancy, the heart rate is high, and the lung capacity is weak, which affects the immune system. Hence, there may be a higher risk of miscarriage and premature delivery. That said, there are no reports of maternal deaths due to COVID-19, so far, including the reproductive fertility treatment center. 

Can Coronavirus Affect Your Baby in The Womb?

In this case, there is good news. The virus is not found in amniotic fluid, placenta tissue, breast milk, or cord blood. This means that there are no possibilities of ‘vertical transmission’ – you won’t be passing the infection to your fetus. 

However, a report from the UK verifies the presence of coronavirus in a new-born. This indicates that babies get infected in the same way as adults, which means through the respiratory droplets, including presumably from an infected mom. 

How to Protect Yourself in Pregnancy? 

Fertility clinics in Arizona highly recommend strengthening your immune system as much as possible. This will help you keep away from any situation that may lead you to a higher risk of being infected. 

Besides, we also suggest that pregnant women take a flu vaccine. As per fertility specialists, it is of utmost importance for pregnant women to do everything possible to maximize their immune system. The flu vaccine is safe to take during pregnancy and also while breastfeeding. And the good news is, the immunity passes to the baby as well. 

Take Advantage of Telemedicine 

You know that staying away from the crowd and maintaining social distancing is key in protecting yourself from COVID-19. The Reproductive fertility treatment center and other hospitals are advising mom-to-be women to adopt a virtual option connecting with doctors. 

So, here are some points that you can help you out:

Participate in reputed prenatal care and childbirth classes posted on YouTube, Skype, and Zoom.

Keep all the digital versions of your health report, including photos. 

Consult your doctor by phone or video conferencing through a computer. 

Create a home pharmacy for yourself, which has essential equipment such as blood pressure machines, urine test strips. Ask your doctor about what equipment you need to keep handy. 

Talk to your health provider frequently to stay updated. 

Fertility clinics in Arizona are reinventing their healthcare environment in real-time to ensure that pregnant ladies stay safe. Chandler-based MomDoc physicians across the Phoenix region are offering virtual healthcare to moms-to-be. Recently, a new telemedicine service has been launched by MomDoc, with 16 offices across the region. Take advantage of it while staying at home – and protect yourself. 

by
Read More
In Sports

Will Prithvi Shaw’s poor form with the Indian team be a concern for DC?

No Comments

Prithvi Shaw was included in the squad for the ODI and the Test series against New Zealand in February. It was a great opportunity for the young batsman to showcase his talent but Shaw never seemed quite in the groove throughout the series. Kiwi pacers, Trent Boult and Tim Southee exposed the chinks in Prithvi Shaw’s armor. 

Shaw struggled a lot against the short balls as he has a big back-lift which leads to bat face to be closed by the time the delivery reaches to him. Although the experts were quick to point out the fault in Shaw’s techniques, Indian skipper backed the young batsman and said that it’s not fair to judge a young batsman playing away from home at such a huge level after a few mistakes. The skipper seemed assured that Shaw will naturally figure it out owing to his natural stroke playing skills. But the young talent was not the only one to struggle against the Kiwi attack. Other big names in the Indian batting lineup also struggled and failed to gauge the nature of the pitch. 

Delhi Capitals will play their first match on the second day of the 2020 IPL Schedule against Kings XI Punjab. This will be Shaw’s third season for the team from the national capital. He has played a total of 25 matches for the team and scored 598 runs with a strike rate of 141. Although his recent form has not been good, it doesn’t seem that it will affect his performance in the IPL.

India will host the South Africans for a three-match ODI series from 12 March to 18 March 2020. The 15-man squad for the series was announced by the BCCI on 8 March 2020. Prithvi Shaw has been picked up in the squad. This selection will help him with his confidence as he is getting the backing of the selectors as well as the skipper. This series will be a good chance for Shaw to find his form and get going before the IPL starts. Rohit Sharma’s absence in the series may provide Shaw with a chance to open the innings for the national side against the Proteas.

Delhi Capitals finished third in the 2019 season of the IPL. This time around, they will be looking to finish in the top two of the IPL Points Table to make their path to the final and eventually to the trophy a bit simple. Delhi Capitals looks strong in the batting department with the likes of Shreyas Iyer, Rishabh PAnt and Prithvi Shaw. This year’s IPl is also going to be crucial for a lot of players as it will be a major chance for the players to show their case for the selection for the 2020 ICC Twenty20 World Cup. A good showing in the ODI series followed by a good haul of runs in the IPL can somewhat guarantee a place for Prithvi Shaw in the upcoming World Cup. But it ain’t going easy for the batsman from the Bombay school of cricket. A lot of talented players are going to be fighting for a select few spots and it will be interesting to see how players perform over the whole span of the tournament. 

 

by
Read More
In Auto

How to Get Your Car Ready to Sell

No Comments

Your car is no doubt your pride and joy, but eventually, it becomes time to move on and buy a new one. Whether it’s because you need a bigger car for your growing family, or want something smaller and sportier, before you start car shopping, you’ll need to sell your old one. Nobody wants their car to sit on the market for ages, so here are some ways you can make it more attractive and more likely to sell quickly. 

Fix any small issues

Before you sell your car, you should ensure it’s well maintained, otherwise, even small things can put off a potential buyer. Some jobs you might need to do include:

  • Topping up oils and fluids so you don’t end up with lights on the dashboard
  • Replacing light bulbs
  • Replacing old wipers
  • Fixing any small, cosmetic issues

If you go to buy a car and there’s an issue like a broken wiper that needs replacing, this is often a red flag, so make sure these jobs are done before you list it.

Fix small scratches and dents

Most buyers will inspect the car carefully before they buy it, and things like small scratches and dents may lead to them trying to get a cheeky discount. Before people come to look at the car, look at some of the products on https://www.liquidr.com.au and repair any small dents with a suction cup, so that the bodywork looks as good as possible.

Give it a good deep clean

Either take the car to a valet, where it can be washed by hand inside and out or do it yourself at home. If you wash your own car, make sure you use suitable products and try to avoid getting streaks on the window by cleaning them with a microfiber cloth. 

Cars that look dirty or smell bad will instantly be a turn-off for buyers, so make sure you get the crumbs out of every crevice, clean the upholstery and use an air freshener to get rid of lingering smells. Don’t use anything that’s too strong smelling, such as vanilla or pine scents, as this can also put people off. 

Make some small upgrades

A few small upgrades can make your car stand out from the crowd and ensure it catches the eye of potential buyers. Whether it’s a new set of tyres to replace old, worn ones, or some new car mats, if you are selling an expensive car then it may be worth spending a little money if you think you’ll recoup it anyway. 

Get the paperwork together

It’s a good idea to get any relevant paperwork related to the car’s history together for when people come to view the car. People will want to know that the car is legal and safe, so ensure you have documents like the title and service history at hand.

Getting your car in sale-ready condition means it’s more likely to sell quickly, so you won’t have to wait long to get your newest set of wheels. 

 

by
Read More
In Tech

What’s changed in the surface measurement industry?

No Comments

Surface measurement is a branch of metrology which generally refers to measuring the topography of precision surfaces, which also includes features (small scale) which are observed on top of surfaces. This simply includes the roughness of surfaces, fractality of surfaces and above all the primary form of surfaces.

It’s worth noting that the earliest pioneers understood the art of surface measurement but they may have lacked the knowledge to understand the roles microscopic structures and role measurement generally played in surface measurement. You can find out more about surface measurement equipment online. Keep reading to learn how the industry has changed.

Methods of comparing roughness

In the earlier generation surface measurement equipment was machined to ascertain the degree of roughness and were also used as reference surfaces. The pioneers at this period of time simply used their thumbnails to scratch the surfaces in question and used their sense of touch to compare them with their reference materials.

This method only worked for the experienced operators. But it proved to be hectic and mathematically unreasonable as there was no existence of data collection and means of quantifying their surfaces. That’s why this method proved to be very subjective to the earlier operators.

The change in preference from smooth to rough surfaces

After a long span of time in which the earliest machinists believed in the notion that smoother surfaces were better than rough surfaces, the view dramatically was changed following a sequence of events with the height of this events coming in the year 1930 when the Bentley Engines company which was at this time rated to be the best manufacturer in smooth cylindrical walls taking over in the management of the Le Mans 24-Hour race. This was followed by a series of events which were necessary for the betterment of surface texture, keeping in mind that at this period of time optical microscopes were used for magnification of surfaces (they were subjective).

Measure of texture and level

People started to use a trace stylus together with a mechanical amplifier which was linked in order to replicate the trace of grass on a glass smoked surface, this kind of method also proved to be subjective and non-workable at times.

Three years later E.J.Abbot invented an instrument that was referred to as the first analog surface instrument. It typically worked by using a stylus to contact the parts to be measured and for the first time this instrument provided an almost accurate quantity of texture.

He also later invented an Abbot-fire stone curve which typically worked by placing a simple curve on the surface to be measured and this curve only made contact on areas of question hence allowing the materials to calculate an air ratio as a function.

Analyzing data

The rising desire to trace a correct surface texture led to the realisation that the stylus tip and the devices that was used with it had a number of limitations. But if it could be merged with a large number of amalgams with different frequencies on the path being traced, it could be possible for the machines to analyze data which was raised from the oretical work.

This discovery led to the development of large numbers of commercial instruments which were popular for their basic rough parameters they included Rz, Ra and also above all the 2RC filters.

This kind of revolution enabled the earlier pioneers to create a number of instruments that could digitise the analog signal from the stylus hence generation of a typical surface profile trace.

With this kind of inventions, we could then apply mathematical tools to analyze and verify profile characteristics. It’s no wonder there are different kinds of materials with national and international quality standards which can be used to analyze different kinds of surface textures. They include the two-dimensional (2-D) profile which has lately been modified into a three dimensional.

Moreover, the modern digitalized instruments can gather a diverse spectrum of data from given kinds of traces and make analysis when possible as compared to the analog instrument which could only gather specific measurement data.

Importance of surface measurement

  1. It’s important in determining the stability of a particular object.
  2. it’s used to define surface roughness

iii. it’s used to measure surface roughness

  1. it’s essential in controlling the surface finish
by
Read More
In Health

How to Stay Committed to Your Fitness Plans?

No Comments

Setting a fitness goal and sticking to it can be one of the most challenging things to do if you’re an adult with other commitments even if there are plenty of gyms in Dubai to choose and walk in. And then sometimes losing complete motivation can also happen. Therefore, let’s consider four ways on how we can facilitate alternatives to attain the body you envision.

 

  • Find a Gym Buddy

 

That beer buddy you call up on Fridays to hit the club can also drive you to your fitness class you’ve been trying to put off every week or so. When you have a fitness buddy with similar interests and goals, they can be there for you at the gym and add a lot of benefits to your progression given how competitive you both can challenge each other in a fun way.

 

  • Stay in Touch with Your Personal Trainer

 

If you have signed up for a serious training session with a personal trainer, it’s always good to be in touch with them not just when you attend the gym. Remember how much you want to look and keep pushing toward that goal, so you will need to maintain a healthy relationship with your trainer at their convenience of course in order to get comfortable asking questions and being guided correctly.

 

  • Download a ‘Reminder’ App

 

Sometimes life and your busy schedules can get in the way of your fitness goals slowly dragging you into procrastination.  To keep track of your intended plan and follow a strict workout routine, take some time off to download any reminder app on your phone. Setting up notification alerts will be an excellent tool to stay motivated and accountable the next time you try to skip that gym class.

 

  • Try the Latest Gym Gizmos and Gadgets

 

Going to the gym regularly means pushing yourself one step at a time and this also means that they should be up to date with the latest fitness tech-trends on display for their members to use. You could also gift yourself one each year. The number of smart gadgets is increasing day by day and so incorporating them into your health-focused workout sessions won’t do you any harm but give you healthy doses of motivational boost. 

 

by
Read More